Rolls of abrasive materials such as emery paper, sand papers or abrasive cloth can now be achieved with minimal knife wear with a Maxson specialty sheeter. The scissors like cutting action of the dual knife rotary design and the MAXSON exclusive cutting clash adjustment greatly extends the knife life over conventional stationary bed knife cutters.
The cutting section includes knives mounted in upper and lower rotating cylinders. Using the exclusive clash adjustment, the Operator can safely adjust the cross cutting blades while the cutter is running, by transversely shifting the upper cylinder across the width of the cutter to increase clash. This allows the Operator to improve cut quality while running the cutter.
Quick lock knife adjustments are used across the upper and lower knife cylinders to allow rapid removal and installation of steel rule blades. With this design, knife changes are completed within 20 minutes.
Capable of speeds of over 300 cuts per minute on an 11” (279 mm) length, the cutter can slit up to 7 piles across the width of the sheeter with a slitter assembly that allows for one slitting cartridge to be in operation while a second cartridge is preset off line for quick insertion when required.