Maxson Automatic: FAQ - Delivery Systems

  
   << previous    next >>   
FAQ - Delivery Systems
  1. I notice full length tape marks on the cut sheet. Where is this occurring, and how can I solve it?


  2. When sheeting a soft coated material, the Operator notices tape marks. The marks do not extend along the entire surface of the sheet. Where is this occurring, and how can I solve it?


  3. What can I do about static buildup when sheeting coated material?


  4. We frequently have jam-ups in the overlap section. As a result, our operator compensate by running the sheeter at slower speeds. Is there anything else I can do?


  5. We recently sheeted an order of coated paper, and had lots of problems due to static. Do you have any suggestions for sheeting coated stock?


  6. We have a problem when running light weight label stock. The sheets have a tendency to skew in the tape system, and this damages the corner of the sheet as it hits the stacker's front stop. What can I do to alleviate this problem?


  7. When sheeting carbonless paper, the sheeted stock sometimes wraps around the cutting section. Once we get past this point, we also have difficulty stacking. Do you have any suggestions?


  8. I am having trouble with delivering and stacking certain materials because of static. Is there anything I can do to my existing sheeter to overcome this problem?

 © Copyright  2008
  HOME | PRODUCTS | CUSTOMER SERVICE | COMPANY PROFILE | CONTACT | FAQ | NEWS & EVENTS
Maxson Automatic Machinery Company          70 Airport Road,    P.O. Box 1517      Westerly, RI        02891-0908     USA        
Telephone: +001.401.596.0162        Fax: +001.401.596.3870